Vsmart Joy 3 is the latest cheap product of VinSmart with the price of about 2-2.5 million. After launching, this machine immediately attracted great attention from users by equipment that rare products with the same price range, such as Snapdragon 632 chip, 3 cameras, 5000mAh battery, fast charging, USB-C port, 18 month warranty …
Possessing many features but the price is cheap, what many people are skeptical about is the quality of Joy 3? Although it is not possible to make an accurate conclusion, but through “cutting the belly” of this machine, we can know somewhat about the quality of VinSmart machining. This becomes even more important when Vsmart Joy 3 is a “Made in Vietnam” product, produced at VinSmart’s factory in Thach That, Hanoi.
Here, let us explore “interior” of Joy 3:
Opening Joy 3 is easy. After turning off the power and removing the SIM tray, users can thread their nails to pry the joints of the back and chassis.
However, users need to be careful when removing the back of the device. Because, there is a cable connecting the fingerprint sensor on the back and mainboard of the machine.
Vsmart Joy 3 is equipped with a fingerprint sensor on the back. In this price range, not all products are equipped with this feature, such as Samsung Galaxy A01, Xiaomi Redmi 8A, Realme C2 … are not available.
The next step will be to remove the screws to lift the protective plastic. This piece of plastic is responsible for protecting the internal components when the machine is hit.
The entire main components of Joy 3.
At this point, users can remove the cable connecting the fingerprint sensor on the back.
The hardware design of Joy 3 is very similar to some other previous products such as Live, Star or Joy 2+. This shows that the Joy 3, despite being a low-cost product, still has the same hardware standard as the more expensive Vsmart products.
The bottom half of the Joy 3 is a small circuit board, accompanied by some components such as a vibrator, microphone, speakerphone, charging port …
This is the entire “brain” of Joy 3. The important chips are protected in metal cage (EMI Shield) to avoid the influence of electromagnetic.
Even the circuit board also has the Vsmart logo
The back of this circuit board is also enclosed by iron cage. To increase heat dissipation efficiency, manufacturers have put a little bit of thermal paste here.
Despite the plastic outer shell, but the inside frame of the Joy 3 is made of metal to ensure the certainty of the machine.
3 camera system of the device, respectively from top to bottom: ultra wide angle camera, main camera and distance measuring camera.
The battery of Vsmart Joy 3 has a capacity of 5000mAh, manufactured by Shenzhen Aerospace Electronic.
All parts of Joy 3.